Heat Shield Robotic News
September 13, 2012 20:18:24
Researchers Look to Alien Soils for Heat Shield
By Source: NASA

KENNEDY SPACE CENTER - An important test is coming up next week to see whether a heat shield made from the soil of the moon, Mars or an asteroid will stand up to the searing demands of a plunge through Earth's atmosphere.

At stake is the possibility that future spacecraft could leave Earth without carrying a heavy heat shield and instead make one on the surface of another world and ride it home safely. The weight savings opens new possibilities ranging from using smaller rockets to carrying many more supplies on an exploration mission.

Michael Hogue, a researcher at NASA's Kennedy Space Center in Florida, came up with the idea during a brainstorming session last year covering different ways to use extraterrestrial soils, known as regolith.

"Others were talking about how regolith can be used to make bricks or landing pads and I said, 'Well, if it's good for that, why can't it be used to make atmospheric entry heat shields?' " Hogue said.

NASA funded the concept research through its NASA Innovative Advanced Concepts, or NIAC, program.

Since then, a team of engineers has been trying out various mixtures and techniques to find out whether the idea has any potential. So far, the tests have been very successful, with small bricks of material standing up well to the intense heat of a blowtorch. A sensor placed behind the brick recorded temperatures of about 200 degrees F compared to the approximately 4000 degrees F the front side endured.

"I expected some to fail," Hogue said. "There is an optimum range of density you need to hit for each material where it's light enough to have low enough thermal conductivity, but also structurally strong enough to survive the forces of atmospheric entry. All of our formulations that we tested with a cutting torch at least passed that."

The dome-shaped bricks, each 2 inches thick and 4 inches in diameter and made of different combinations of material, will face their toughest test next week when they are placed inside the arc jet facility at NASA's Ames Research Center in California. There, they will be subjected to a scorching plasma stream that will put the bricks through heating conditions similar to those seen in during entry.

"That will ultimately determine whether this idea is feasible or not," Hogue said.

The concept, while promising, is far from becoming operational. At this point, Hogue puts the concept at a TRL, or technology readiness level, of 1 on a scale of 9, with 9 being an operational element. Working it up the TRL scale will take a series of evaluations, adaptations and inventions, including potentially trying out a sample disc on the bottom of a cargo spacecraft returning from the International Space Station.

Hogue said his attitude has gone "from guarded skepticism to hopeful enthusiasm" on the effort.

The potential weight-savings is too great to ignore, Hogue said.

Making the heat shield in space would likely be the work of a robotic device, or at least a heavily automated system to either mix the regolith with a rubbery substance in a mold or heat a large disc of regolith until the soil elements fuse together. The heat shield could then be cut and shaped as needed.

The primary advantage is that getting the finished heat shield off an asteroid or Martian moon would take very little force because the gravity is so low. The heat shield could be as big as anyone would want. It could be used to insulate a spacecraft whether it is going to the Martian surface or back to Earth.

The weight savings is critical to the plan because the regolith material is anything but light. A brick of regolith, actually made from Mars and moon soil simulant instead of actual extraterrestrial dirt, feels the same in the hand as a brick one builds a house from on Earth.

Also, the heat shield would not be reusable, but would be designed to have some layers fleck or burn off, a process called ablating. All heat shields except the space shuttles' were made of ablative material.

"You can make it massive and if it heats up and ablates off, all the better because the ablated mass takes heat with it." Hogue said. "After about five minutes you jettison the shield over water and you're done." 

 A 2-inch by 4-inch brick is heated by a welding torch in a test of a concept for making heat shields from the soil of other worlds. Photo credit: NASA

 

More Interactive Photography
Gale CratorInterActive First look crisp look around Gale Crator This 360-degree, full-resolution panorama from NASA's Curiosity rover shows the area all around...
Endeavour nose gear in OPFInterActive Endeavour nose gear in OPF This was shot from forward and underneath Space Shuttle Endeavour in the Orbiter Processing...
Endeavor engine compartmentInterActive Endeavor engine compartment View into the Space Shuttle's engine compartment with the three main engines removed.
Endeavor engine compartmentInterActive Endeavor engine compartment View into the Space Shuttle's engine compartment with the three main engines removed.
Endeavour Cargo BayInterActive Endeavour Cargo Bay This image was shot from the forward end of Space Shuttle Endeavour's cargo ba as it sits in...
Interior view of the Space Shuttle Endeavour forward flight deck. InterActive Interior view of the Space Shuttle Endeavour forward flight deck. Interior view of the Space Shuttle Endeavour aft flight deck.
Endeavour Forward Flight DeckInterActive Endeavour Forward Flight Deck Interior view of the Space Shuttle Endeavour forward flight deck.
Atlas V with Mars Science Laboratory payloadInterActive Atlas V with Mars Science Laboratory payload The rover Curiosity will carry the biggest, most advanced suite of instruments for scientific...
Curiosity roverInterActive Curiosity rover NASA's Mars Science Laboratory Curiosity rover, a mobile robot for investigating Mars' past or...
Curiosity roverInterActive Curiosity rover NASA's Mars Science Laboratory Curiosity rover, a mobile robot for investigating Mars' past or...
Gravity Recovery and Interior LaboratoryInterActive GRAIL The Gravity Recovery and Interior Laboratory mission's primary science objectives will be to...
Atlas V AV-029InterActive Atlas V AV-029 ULA Atlas V number AV-029 reaches launch pad on August 4th, 2011. In less than 1 day this Atlas...
Atlas V up closeInterActive Atlas V up close Get to know the Atlas V up close. Explore the rivets in this 74.62 megapixel image of the Atlas...
JUNO Atlas VInterActive JUNO Atlas V ULA Atlas V with the JUNO probe sitting atop at Cape Canaveral Air Force Station is ready for...
Atlantis at wheels stop on runway 15InterActive Atlantis on runway Space Shuttle Atlantis returned to Earth in the predawn hours of July 21st, 2011. Marking the...
Atlantis at wheels stop on runway 15InterActive Atlantis at wheels stop on runway 15 Space Shuttle Atlantis returned to Earth in the predawn hours of July 21st, 2011. Marking the...
Atlantis and towerInterActive Atlantis and tower Space shuttle Atlantis waits to receive payload for the final space shuttle mission STS-135,...
Atlantis payload preparationsInterActive Atlantis payload preparations Space shuttle Atlantis at pad 39A. The payload canister can be seen lifted in to position to...
Walk with the astronautsInterActive Walk with the astronauts A view of the 195ft level of the fixed service structure. This where the astronauts arrive at...
Last Space Shuttle prepares for launchInterActive Last Space Shuttle prepares for launch A close in look at space shuttle Atlantis on June 17th. Launch preparations are on going for...
The last space shuttle to be on the launch padInterActive The last space shuttle to be on the launch pad Space shuttle Atlantis, the last space shuttle to flight begins launch prepartions at pad 39A...
Last space shuttle arrives at launch padInterActive Last space shuttle arrives at launch pad Space shuttle Atlantis is seen here from the top of the rotating service structure the moring...
The last space shuttle has left the buildingInterActive The last space shuttle has left the building Space shuttle Atlantis rolls out of the Vehicle Assembly Building for the last time on the...
Space Shuttle Atlantis prepared to rollout to pad   InterActive Space Shuttle Atlantis prepared to rollout to pad Space shuttle Atlantis complete with the solid rocket boosters and external tank that will...
HiRes Atlantis hanging in VABInterActive HiRes Atlantis hanging in VAB HiRes image of Space Shuttle Atlantis hanging in the Vehical Assembly Building. This shot was...
Atlantis vertical from VAB Level 5InterActive Atlantis vertical from VAB Level 5 Space Shuttle Atlantis after being lifted into the verticle position before being mated to the...
Atlantis verticalInterActive Atlantis vertical Space Shuttle Atlantis hangs vertical before removing the rear hoist and lifting it for the...
Atlantis rolling verticalInterActive Atlantis rolling vertical Here Space Shuttle Atlantis is almost vertical being positioned to soon be mated to the...
Atlantis hanging in VABInterActive Atlantis hanging in VAB Space Shuttle Atlantis is seen here hanging about 10 feet above the VAB floor. It has justed...
Endeavour at nightInterActive Endeavour at night Space shuttle Endeavour seen here at night as launch preparation continue for the first launch...
Atlantis rolling over to VAB for final missionInterActive Atlantis rolling over to VAB for final mission Space Shuttle Atlantis rolling over the VAB for the last time. Atlantis is scheduled to be the...
Atlantis outside VAB for employee photosInterActive Atlantis outside VAB for employee photos Space shuttle Atlantis, the last space shuttle, pauses during rollover from the OPF to the VAB...
Hi Resolution image of the last space shuttleInterActive Hi Resolution image of the last space shuttle Hi Resolution composit image of the last space shuttle, Atlantis, as it sits atop the transport...
Atlantis in the VABInterActive Atlantis in the VAB Nice 360 degree view of the VAB with Atlantis being preped for the Lift and Mate procedure
Atlantis on the sled in VABInterActive Atlantis on the sled in VAB Explore the VAB with Space Shuttle Atlantis on the sled after rollover to the VAB jst before...
Atlantis being attached to slingInterActive Atlantis being attached to sling Full 360 degree panorama from inside the VAB as Space Shuttle Atlantis is attached to the sling...
Endeavour after RSS retractionInterActive Endeavour after RSS retraction Hi-Res image of Space Shuttle Endeavour on the launch pad 39A minutes after the RSS was...
The Mound STS-134 4/29 AttemptInterActive The Mound STS-134 4/29 Attempt This a 360 degree panorama from the mound of the KSC media center. This was the scence about an...
Alpha Magnetic Spectrometer (AMS)InterActive Alpha Magnetic Spectrometer (AMS) The Alpha Magnetic Spectrometer-2, a particle physics detector designed to search for various...
AMS in the SSPFInterActive AMS in the SSPF The Alpha Magnetic Spectrometer-2, a particle physics detector designed to search for various...
Here is Space Shuttle Endeavour just after sunriseInterActive Here is Space Shuttle Endeavour just after sunrise Here is Space Shuttle Endeavour just after sunrise the morning it arrived from the VAB. How...
Endeavour in the VABInterActive Endeavour in the VAB Space Shuttle Endeavour sitting stacked and ready atop the crawler to rollout the launch pad.
Endeavour in the VABInterActive Endeavour in the VAB Space Shuttle Endeavour sitting stacked and ready atop the crawler to rollout the launch pad.
Space Shuttle Discovery final towoverInterActive Space Shuttle Discovery final towover View of Space Shuttle Discovery 4 hours after returning to Earth for the last time. Discovery...
Space Shuttle Discovery Final LaunchInterActive Space Shuttle Discovery Final Launch This a 360 degree panorama taken 3 mile from the launch pad capturing the final lift off of...
Space shuttle Discovery final launchInterActive Space shuttle Discovery final launch This a 360 degree panorama taken 3 mile from the launch pad capturing the final lift off of...
Discovery at NightInterActive Discovery at Night This a panorama of Space Shuttle Discovery shortly after RSS retraction on 11/3/2010 preparing...
GRIP DC-8 PanoramaInterActive GRIP DC-8 Panorama Interior of forward section of NASA GRIP aircraft while configured for studding hurricane...
GRIP DC-8 InteriorInterActive GRIP DC-8 Interior Interior of forward section of NASA GRIP aircraft while configured for studding hurricane...
NASA GRIP DC-8InterActive NASA GRIP DC-8 The NASA DC-8 is a four-engine jet transport that has been highly modified to support the...
Endeavour on padInterActive Endeavour ready for launch HiRes image of Endeavour at Pad 39A
AMS-2 Antimatter TelescopeInterActive AMS-2 Antimatter Telescope Explore the SSPF and ESA's Antimatter Telescope. 360 rotating,zoomable Panorama!
Spectacular ultra hi-rez interactive shot of the Space Shuttle Endeavour on the launch pad for the last timeInterActive Explore LC-39A !! Spectacular ultra hi-rez interactive shot of the Space Shuttle Endeavour on the launch pad for...